The DV HDI Series 5 / 30 HP Heavy-duty industrial reciprocating air compressors are designed to deliver a heavy-duty, long-lasting and reliable air compressor manufactured to combat the most strenuous of industrial environments. Heavily-weighted cast iron pumps, coupled with low rpm provide improved heat dissipation allowing up to a 75% duty-cycle.
The DV HDI Series is available in Simplex & Duplex Configurations, The DV HDI Series 5HP to 30HP comes with a 2-Stage, 2-Cylinder (247) or 4-Cylinder (447) Cast-Iron Compressor Pumps Powered by highly efficient Open Drip Proof (ODP) motors. These motors provide dependable, high duty-cycle service.
DV’s proprietary pressure lubrication process provides assurance that the oil is transported to journal bearings and all the required parts, reducing oil carry-over and friction.
The moving parts of these pumps are machined, honed, balanced and put together in Canada. Sturdy construction and long life give DV Systems the confidence to provide an unequaled seven-year warranty for the DV HDI Series.
Perfect for the toughest industrial applications
Delivers 75-80% duty-cycle performance
Durable operation
Improved heat disbursement
Tough construction for extended life
DV’s proprietary pressure lubrication process allows for precise lubrication to the most important parts via the use of an oil ring pickup.
All cylinders are meticulously manufactured and machined to specific tolerances, to reduce wear.
Balanced crankshafts and precision ground journals, coupled with heavy-duty ball-type primary bearings, deliver smooth, high performing operation.
Dynamically balanced, Airfoil-Type Flywheels mean an ongoing supply of cooling air to all the components of the compressor.
Short stroke load matched pistons, together with top quality alloy steel disc-type valves provide for cool running and maintenance-free service.
| Motor Output | 5 to 30 Horse Power (HP) |
|---|---|
| Air Capacity Delivery | 19.8 to 99.9 Standard cubic feet per minute at 145 psi |
| Compressor Pump | Type 247 & 447
Cylinder 2/4 |
| Motor Revolutions per Minute (RPM) | Stage 2
RPM 635 – 845 |
| Electrical Power | Motor ODP (Open Drip Proof)
Single Phase 230V/23-85.5A, 60Hz Three Phase 200V/15.4-71.2A 230V/13.2-71.2A 460V/6.6-35.6A 575V/5.3-30A 60Hz |
The air-cooled, pressure-lubricated, reciprocating Heavy-Duty Industrial Series is designed to allow for a heavy-duty, reliable and long lasting air compressor designed to accommodate the most stringent industrial applications.
Available in both Simplex & Duplex configurations, the DV HDI Series 5HP to 30HP is equipped with 2-Stage, 2- cylinder (247) or 4-cylinder (447) cast-iron compressor pumps powered by premium-efficiency North American made open drip proof (ODP) motors, delivering dependable, high duty-cycle operation.
The heavily weighted cast iron pumps and Low RPM improve heat disbursement enabling up to 80% duty-cycle. Pressure lubrication makes certain that oil is delivered to journal bearings and all the required parts, reducing oil carry-over and friction.
Single-Phase 230V
3-Phase: 200-208V/230V/460V/575V
Base-Mounted No Air Receiver Tank-Mounted 80 Gal Horizontal or Vertical ASME Approved CRN Registered Air Receiver
MS Definite Purpose Magnetic Starter XL Definite Purpose Magnetic Starter, Low Oil-Level Sight / Shut-Down Monitor & Auto Drain
13 HP Honda Gas Engine
Base-Mounted No Air Receiver
Tank-Mounted 30 Gal Horizontal ASME Approved & CRN Registered Air Receiver
Standard
Automatic Unloader & Electric Starter on Engine
3-Phase: 200-208V/230V/460V/575V
Base-Mounted No Air Receiver
Tank-Mounted 120 Gal Horizontal or Vertical ASME Approved & CRN Registered Air Receiver
MS Definite Purpose Magnetic Starter
XL Definite Purpose Magnetic Starter, Low Oil-Level Sight / Shut-Down Monitor & Auto Drain
Optional Constant Run-Stop-Start Controls
3-Phase: 200-208V/230V/460V/575V
Base-Mounted No Air Receiver
Tank-Mounted 240 Gal Horizontal ASME Approved & CRN Registered Air Receiver
XL Definite Purpose Magnetic Starter, Low Oil-Level Sight / Shut-Down Monitor & Auto Drain
Optional Constant Run-Stop-Start Controls
Duplex units are equipped with 2-Stage, 2-Cylinder 247 [5HP & 7.5HP] or 4-Cylinder 447 [10HP & 15HP] cast-iron compressor pumps, 2 ODP motors, and 2 optional magnetic starters with an alternator relay, or an optional alternating control panel [ACP] providing reliable, continuous-use, 24/7 operation.
Features two cast-Iron compressor pumps, two high- efficiency North American made open drip proof [ODP] motors, and an air receiver
Features the basic duplex + two definite purpose magnetic starters & alternator relay. The magnetic starters & alternator relay act as a simple alternator, enabling each pump & motor combination to start alternately.
Features the basic duplex + two definite purpose magnetic starters & alternator relay, two low oil level shutdown monitors/switches and pneumatic auto drain.
The magnetic starters & alternator relay act as a simple alternator, enabling each pump & motor combination to start alternately
An advanced alternator option enabling each pump motor combination to start alternately, providing reliable, continuous-Use, 24/7 operation. If the active pump & motor cannot deliver the desired demand,the secondary pump & motor is automatically enlisted.The ACP configuration includes the Duplex air compressor + an alternator control panel driven by a logic relay preloaded with an alternating program
